914Rubber Tribal Knowledge Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

**COMPLETE 914RUBBER TARGA SEAL SET INSTALLATION**

Nathan (Barefoot Garage) shows you how to install the complete Targa Seal set. 

A couple of fine points: 
  * We don't recommend pulling the targa to window seals in on the top as they will "shrink" unless you have relieved all of the stress of pulling them through. 
  * The biggest problem we see with installing these seals is that most people try to pull the seals on the roof at the top of the window.
  * There are also screws that hold the corner blocks in place so when you remove the roof the corners don't pop off. It's important to note these do serve a purpose.

{{youtube>2uc6zbCNYQA?large}}

And check the other targa seal installation videos in the wiki for more details about the various seals and how they are installed. 

Get the [[https://914rubber.com/targa-seal-kit-for-porsche-914|Targa Seal Kit for Porsche 914]] here.